When I came over here, I brought my Netgear DG824M, because I figured that it’d be useful, at the very least as a WAP, hooked off whatever I got sorted out with here, if not as my main DSL modem for my connection here. Instead, it turns out that I got cable, and it didn’t work as a WAP for that, because I couldn’t get it to not act as a DHCP server, and have the cable modem do that part of things, and it didn’t like to play otherwise. So – long story short, I bought a new modem!

Having had a good experience with Netgear products so far, I stuck with them for my new modem, and hunted down a WGR614, which I bought from EBuyer.com. Once I get my rebate, it will have been a $35 router – not bad for something that would probably cost $200 in Australia 🙂

Since I previously had difficulty getting WEP to work with my XP machine, and had been running with it turned off (only using MAC-based restrictions), I figured it would be worth a shot to see if I could get it going using this modem. For some reason, it works! I still don’t know why, but when I turned WEP on, entered the generated key on my PC, laptop and iPAQ, everything Just Worked™.

I thought I was doing really well, had my wireless connection to the ‘net via PC, laptop and iPAQ, when I noticed that I was having problems with my PC – every 5 minutes or so, I would lose my connection to the WAP, then it would reconnect. This wouldn’t have been the end of the world (although it was annoying), but half the time my PC would pick up the connection to the other, un-secured network that’s around here, and connect to that instead. Then there was also the obvious problem of if I was doing a download or upload or gaming or something, a connection that consistently drops out every 5 minutes isn’t much use.

I checked Netgear’s support site for the modem, and downloaded the firmware update for it, which I hoped would fix the problem. I applied the update (no need to re-enter any configuration on the modem BTW, it retained all settings), but the problem persisted.

Just in case, I did a Windows Update to see if it would pick up anything. What do you know, there was an update there for Netgear, under the ‘Driver Updates’ section (not listed in ‘Critical Updates and Service Packs’). I installed it, and hey presto, my connection is clean as now. Haven’t had it drop out now in over 12 hours (which is only how long it’s been installed, so it’s never dropped off since installation).

This makes me happy – it means that now I can actually run WEP, which makes me feel better about having wireless, especially knowing there’s another network within range. I have a solid connection, which my iPAQ, PC and laptop can all share, which is relatively secure, and pretty darned fast. I haven’t bothered optimising the position of my WAP, because it has perfect range into my bedroom and onto my balcony, so there’s no need, and hopefully having it under my desk will reduce the overflow into the street and around the place.

Yay Netgear, yay wireless!