WirelessPirate.net

Fun without wires

Archive for the ‘windows xp’ tag

Given Up On Wireless

without comments

Well, I went ahead and did the Service Pack 2 upgrade for Win XP Pro, and have had nothing but problems recently with my wireless adaptor. I don’t know if it’s directly related or not, but basically my adaptor would drop out and not allow me to get an IP (even though it thought it was connected successfully). Obviously this is a problem for getting internet access.

With no time to waste figuring out what the hell is going on, I’ve disconnected the adaptor and resorted to plugging my desktop directly into my router (ugh – cables!), and I have complete access again. What tells me that it’s the adaptors fault is that my laptop and iPAQ still work just fine, connecting to the same router/cable modem etc.

So now my desktop is back to a cabled connection, but I suppose that kind of makes sense. Somewhere along the line I’ll sort it out, but for now that will have to do.

Written by Beau Lebens

October 25th, 2004 at 4:00 pm

Netgear WGR614 Wireless Cable/DSL Router

without comments

When I came over here, I brought my Netgear DG824M, because I figured that it’d be useful, at the very least as a WAP, hooked off whatever I got sorted out with here, if not as my main DSL modem for my connection here. Instead, it turns out that I got cable, and it didn’t work as a WAP for that, because I couldn’t get it to not act as a DHCP server, and have the cable modem do that part of things, and it didn’t like to play otherwise. So – long story short, I bought a new modem!

Netgear WGR614
Having had a good experience with Netgear products so far, I stuck with them for my new modem, and hunted down a WGR614, which I bought from EBuyer.com. Once I get my rebate, it will have been a $35 router – not bad for something that would probably cost $200 in Australia 🙂

Since I previously had difficulty getting WEP to work with my XP machine, and had been running with it turned off (only using MAC-based restrictions), I figured it would be worth a shot to see if I could get it going using this modem. For some reason, it works! I still don’t know why, but when I turned WEP on, entered the generated key on my PC, laptop and iPAQ, everything Just Worked™.

I thought I was doing really well, had my wireless connection to the ‘net via PC, laptop and iPAQ, when I noticed that I was having problems with my PC – every 5 minutes or so, I would lose my connection to the WAP, then it would reconnect. This wouldn’t have been the end of the world (although it was annoying), but half the time my PC would pick up the connection to the other, un-secured network that’s around here, and connect to that instead. Then there was also the obvious problem of if I was doing a download or upload or gaming or something, a connection that consistently drops out every 5 minutes isn’t much use.

I checked Netgear’s support site for the modem, and downloaded the firmware update for it, which I hoped would fix the problem. I applied the update (no need to re-enter any configuration on the modem BTW, it retained all settings), but the problem persisted.

Just in case, I did a Windows Update to see if it would pick up anything. What do you know, there was an update there for Netgear, under the ‘Driver Updates’ section (not listed in ‘Critical Updates and Service Packs’). I installed it, and hey presto, my connection is clean as now. Haven’t had it drop out now in over 12 hours (which is only how long it’s been installed, so it’s never dropped off since installation).

This makes me happy – it means that now I can actually run WEP, which makes me feel better about having wireless, especially knowing there’s another network within range. I have a solid connection, which my iPAQ, PC and laptop can all share, which is relatively secure, and pretty darned fast. I haven’t bothered optimising the position of my WAP, because it has perfect range into my bedroom and onto my balcony, so there’s no need, and hopefully having it under my desk will reduce the overflow into the street and around the place.

Yay Netgear, yay wireless!

Written by Beau Lebens

July 4th, 2004 at 4:00 pm

Configuring a Wireless Network under Windows XP

without comments

So I got my new computer (well, most of the pieces anyway, the keyboard’s coming next week hopefully), and I wanted to get wireles set up and running straight away so that I could get on the ‘net with it and download any patches etc that I needed. I get everything connected, then get my box to pick up my AP and then what happens? Nothing. Absolutely, positively, not a damn thing. For some reason, I could not get my desktop box to connect properly to my AP. It would say it was connected, but if I logged into the admin interface on it (using my lappy luckily), it wouldn’t say it was connected.

To cut a potentially long story short, I tried playing with some of the settings in Windows’ control panel, and it turns out that XP and the Netgear control utility don’t play so well together. When I told XP to control all wireless network settings, everything Just Worked(tm).

So now I am posting this, the first post from my new desktop, which is wirelessly connected to the ‘net (insecurely ATM!) into another room, where my modem sits on its own. When I get my keyboard, things will really be getting wireless, but this will do nicely until then!

Written by Beau Lebens

February 26th, 2004 at 4:00 pm